Step 1 - Take a piece of the clay and flatten it to about a ½”. If the clay is to hard, use some water to soften it up.
Step 2 – Using the bottle cap as a guide cut out a circle from the clay
Step 3 – Using the paper clip push in five holes into the circles.
Step 4 – Place the circle cut out flat on the page touching at least one other circle forming a clay wall. Keep in mind structure as you build up the wall, and you can use a little water to help stick the pieces together.
Step 5 - Repeat steps 1-4
This project reminded me of ancient wall system. The procedure is very simple but very efficient and structurally stable. It is very interesting to see how the participants stacked up the units uniformly as the same way as stacking up brick units.
ReplyDelete